F
RESTVILLE TECHNOLOGIES
A Worldwide Marketing Representative Group
We are the Representative of JSI - Malaysia.
AVI Eagle: Auto Vision Inspection for Leadframes
Benefits:
- No more customer complaints on quality issue due to rejects escapes.
- No delicate lead frames (eg high pin count, half etched matrix lead frames) handling issue like leads shifting.
- Better customer confidence in product quality.
- Reduce final inspection operator headcount and improve products yield.
- Automatic sort/pack to trays.
Bowl to tubes or canister inspection machine
Key features:
- Input from vibrating bowl.
- Top package or Bottom package inspection.
- Automatic package orientation correction.
- Output horizontal tube stacker, or Canister. Option, output to tray.
- Reject canister.
- Industry PC Control.
- Compact version 1200mm x 800mm (main frame).
- UPH 15K based on 100% good units.
- Software selectable output to tube or canister.
Mold Auto Lead Frame Loader
- Gantry robots pick and place.
- Better placement consistency.
- Multiple magazines input.
- Easy correction of loader positions.
- Easy conversion.
- Hot plate to preheat the leadframe.
- Leadframe orientation check.
- Low cost and quality solutions.
3rd Optical Inspection Machine
- To inspect matrix leadframes.
- Auto indexing (with programmable delay).
- For High Density Leadfames.
- Leadframe jam sensor.
- Programmable XY punch position.
- Programmable indexing and elevator.
- Programmable indexing rail width.
- Software to accumulates inspection data.
- Digital counter to track punch-life.
- 2D data matrix reader.
- Leadframe mapping.
- Wire loop height inspection.
Laser Mark Handler
- Single or Dual leadframe carrier.
- Vacuum or Gripper pickup.
- Stack or Slot Magazine.
- Vision Orientation Leadframe checking.
- Vision Mark Inspection.
- High Speed 1200 Leadframes per hour (dry cycle).
- Strong suction vacuum.
- Handles all types of leadframes.
- PC Based.
- 2 D Matrix reader.
- Leadframe mapping.
Auto Dispensing Handler
- PC based control system.
- Programmable pitching. Programmable single elevator.
- Ball screw for elevator and linear motion guide for indexing.
- Grind and chrome tool-steel indexing rails.
- Locating pin system for accurate frame positioning.
- User programming dispensing positions with line, circle, pause, point and more.
- Dispenser mounted on x-y-z sliders.
- Recalibration of dispenser needles x-y-z positions.
- Programs save, delete and recall.
- Stepper motors for elevator and indexing.
- Servo motors x-y-z stages.
- Vision alignment and inspection.
- Multiple magazines onload and offload.
32 Stations Turret Test Handler
- Flexible and Multiple input choices - up to 2 input modules.
- Parallel Test Station.
- Standard Test Station.
- Device Orientator - 90deg, -90 deg, 180deg turn.
- Laser Marking.
- Vision Inspection - 2D and 3D vision systems, In- tape Inspection, Lead Inspection, Scratch Inspection, Mark Inspection, Device Inspection.
- Flexible and Multiple output choices - up to 5 output modules.
- Tube Elevator - 5 tubes loading and single or multiple bins sorting.
- Automatic Output Tube / Tray Stacker.
- Tape & Reel - In-tape Inspection, Heat / Pressure sealing.
- High speed 20k at 50msec test time.
- Very flexible configuration options with 32 stations.
- Quality and compact handler.
Auto Die Placement Inspection Machine
- Auto inspection for Die Attached defects.
- Check die presence/absence.
- Check Die placement (x,y, and theta).
- Check Die position.
- Check stray die and epoxy.
- Check epoxy coverage.
- Check epoxy shorted from die to lead.
- Multiple magazines onload/offload.
- Leadframe jam sensor.
- Gripper to load/unload leadframe from magazine.
- Programmable indexing position and elevator position.
- Programmable indexing rail for easy conversion to different leadframes.
- PC based control system.
JSI Automatic labeling, filling, capping and batching machine
- Conveyor station.
- Tube loading station.
- Labeling Station.
- Dispensing Station.
- Rubber Stopper Loading station.
- Vacuum and Capping Station.
- Batching Station.
